Go Bottom Go Bottom

Help with my JD755 and my front end loader

View my Photos
dls
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

1999-06-01          4600

I took off my front end loader, a JD model 70, and when I went to put it back on somehow my markings on the hydraulic lines got crossed up. I don't have a manual and need some help putting them back on. I don't know which line plugs where. I need help!! Any help would be appreciated. Thanks in advance.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Help with my JD755 and my front end loader

View my Photos
Norm
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

1999-06-01          4606

Facing the cluster of four female connectors (looking towards the back of the tractor)Yellow - Bucket Cylinder - Rod End: connects lower leftBlack - Lift Cylinder - Rod End: connects lower rightSilver - Bucket Cylinder - Base End: connects upper leftGreen - Lift Cylinder - Base End: connects upper right(If you had to, there really aren't that many combinations to try if you set about it systematically)Good luck ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Help with my JD755 and my front end loader

View my Photos
dls
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

1999-06-02          4667

I didn't have color coded caps, but I followed the lines to the hookups you indicated and it worked. Thanks again. I think I will make a trip to the local John Deere dealer and buy some color caps for my hydraulic lines. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login